| Workpiece | |||
| Category | Automotive part−Power train component |  |
|
| Name | Clutch Body | ||
| Material | Nickel chrome molybdenum steel | ||
| Description | Approx. 100mm external diameter | ||
| Pre-Processing | Gear cutting | ||
| Processing Methods/Conditions | |||
| Tool Used | A11-CB40M | ||
| Description | Deburring gear surfaces | ||
| Conditions | Tool revolutions 2000rpm | ||
| Tool pressure 0.5kgf | |||
| Processing time 20sec／pc | |||
| Effectiveness on Installation of XEBEC Cutting Fiber | |||
| Before | Tool Used：Abrasive-impregnated nylon brushes |  |
|
| Nylon brushes with grinding powder left excessive burrs and took too much time. | |||
| After | Tool Used：Cutting Fiber A11-CB40M |  |
|
| Burrs eliminated, processing time shortened (40 sec->20 sec) |
|||