| Workpiece |
| Category |
Automotive parts -Engine component |
 |
| Name |
Oil Pan |
| Material |
Aluminum Alloy |
| Description |
Matching Surface |
| Pre-Processing |
Milling |
| Processing Methods/Conditions |
| Tool Used |
A11-CB40M |
|
| Description |
After milling, deburr the matching surface |
| Conditions |
Tool Revolutions 2000rpm |
| Tool Pressure 0.5kgf |
| Feed Rate 3000mm/min |
| Effectiveness on Installation of XEBEC Cutting Fiber |
| Before |
Tool Used：Wire Brushes |
|
| Manual Processing with wire brushes left scratches |
| After |
Tool Used：Cutting Fiber A11-CB40M |
|
| No more scratches on the surface; full automation with machining centers
was possible |