■XEBEC Floating Holder
Lineup |
| |
 |
| Product Code |
FH-XBC |
Target Shank Diameter
|
ø8mm*1 |
| ø6mm（When special bushing is mounted）*2 |
| Floating Stroke |
6mm |
| Spring Load |
When actuated for 0mm stroke |
Approx.4.5N （0.45kgf） |
| When actuated for 6mm stroke |
Approx.6.3N （0.63kgf） |
| maximum rpm |
5,000rpm |
| Diameter of Brushes for XEBEC Cutting Fiber |
| ø8mmshank diameter*1 |
A11-CB40M
A11-CB25M |
A21-CB40M
A21-CB25M |
| ø6mmshank diameter*2 |
A11-CB15M
A11-CB06M
CH-A12-05M
|
A21-CB15M
A21-CB06M
CH-A12-07M
|
|
|
 |
| |
| |
■BIG XEBEC(Floating holder custom designed for a machining center
is also available.)
Lineup |
| |
 |
| Product Code |
FH-BT30 |
FH-BT40 |
Target Shank Diameter
|
ø8mm |
ø8mm |
Brushes that can be mounted
(Brushes are to be used with the sleeve as a set) |
A11-CB40M
A21-CB40M
A21-CB25M
A21-CB25M |
| Floating Stroke |
6mm |
6mm |
| Length below gauge line |
75mm |
60mm |
| Spring Load |
When actuated for 0mm stroke |
Approx.2Ｎ～6Ｎ |
Approx.2Ｎ～6Ｎ |
| When actuated for 6mm stroke |
Approx.6Ｎ～10Ｎ |
Approx.6Ｎ～10Ｎ |
- Spring load can be adjusted in the range of approximately 2N～6N when floating stroke is 0mm, and approximately 6N~10N when floating stroke is 6mm.
- Spring load can be adjusted with hexagon adjustable spanner.
|
|
|
