Usage Precautions

[When using with a vibration tool (electrical, ultrasonic, or air)] Read the instruction manual of your vibration tool carefully. [When using with an ultrasonic tool] Check the appropriate output. The tool may break or generate heat when output is too large. Check the appropriate length. If the length is inappropriate, the tool may not oscillate, or concentrated output may result in excessive heat generation. Clamp securely.Poor clamping may concentrate output, resulting in excessive heat generation. Polishing performance may vary depending on the structure and method of the clamp in use. Read carefully the instruction manual of your ultrasonic tool carefully. [When using the Rod Type with a hand grinder] Use below the maximum 30,000rpm. Use below 50mm full length. (If full length is more than 50mm, make sure to cut it below 50mm surely) [Others] Always wear protective goggles, gloves, and a mask when operating the tool.