Product: XEBEC Brush Length Adjustment Tool™

XEBEC Floating Holder  FH-BT 製品イメージ

Optional Tools for XEBEC Brush Surface This jig is only for adjusting the brush projection for the XXEBEC Brush Surface.

Corresponding XEBEC Brush Surface Brush size Φ15 - Φ100mm.

It is ideal for use in mass production line!

Features

This jig is exclusively for adjusting the brush projection for the XEBEC Brush Surface.
It allows quick in-machine brush adjustment.

Schematic drawing

概略図
使用方法 イメージ

Precaution in Use

[Pre-operation Inspection]

  • Before using this device, please confirm that XEBEC Brush Surface attached to the machine have completely stopped rotating.
  • If this device is dropped on the floor etc., the built-in hexagonal wrenches may pop out. Please take care not to lose these wrenches.
  • This jig is only for adjusting the brush projection for the XEBEC Brush Surface. You can use brush diameters of 15 mm to 100 mm.
  • Be sure to read the XEBEC Brush Surface instruction manual carefully before using this device.

Operation Safety Measure

[For protective Equipment]

  • Always wear protective goggles, gloves and masks when oparating the tool. Wear long sleeves, tight cuff, and clothing to minimize skin exposure.

[Beware of Grinding Powder]

  • Grinding powder and burrs may scatter within an area around the work as the tools revolve; please stay clear of this area.
    When using on high-precision equipment, the abrasive powder may adversely affect the sliding parts, so please be sure to collect any dust and keep clean the equipment.

[Caution to your surroundings]

  • The area around your work is hazardous in case flying pieces of fiber rods from the tools and grinding powder may scatter, enclose your working area to prevent other people entering, or have the people surrounding your work area protective equipment as well.
Operation Safety Measure

Specifications Table

Product Code Product Name Corresponding XEBEC Brush™ Surface Brush Size Size of Including Hexagonal wrench
XBC-EZ001 XEBEC Brush Length Adjustment Tool™ Φ15 - Φ100 2.0mm
1.5mm
Product image