Cylinder head(matching surface)

Deburring of the matching surface after face milling process.

Effects after installation

BEFORE

Tool
Abrasives-impregnated nylon brush
Problem
Deburring took long hours and burrs still remained after processing due to low grinding power. Moreover, workpiece was contaminated by Nylon brushes which needed to be cleaned up.

AFTER

Tool
Effect
High-feed processing shortened cycle time. Coolant had less than a third of stain that had had before which saved the trouble of cleaning.

Workpiece information

Industry
Automotive
Part name
Cylinder head(matching surface)
Material type
ADC12
Cutting process
Front cutter processing

Processing conditions

Tool
Processing detail
Deburring of the matching surface after face milling process.
Rotation speed (min-1)
1,350
Feed, feed rate (mm/min)
2,000
Depth of cut (mm)
0.5
Machining time (sec)
-

CASE STUDY TOP

page top