Crankshaft(Cross-hole)

Cross-hole deburring after drilling process

Effects after installation

BEFORE

Tool
Cutter
Problem
Manual deburring left burrs and caused low production rate.

AFTER

Tool
Effect
Achieved fully automated deburring with machining center. Edge quality stabilized and cost was reduced.

Workpiece information

Industry
Automotive
Part name
Crankshaft(Cross-hole)
Material type
S48C
Cutting process
Drilling

Processing conditions

Tool
Processing detail
Cross-hole deburring after drilling process
Rotation speed(min-1)
1,350
Feed, feed rate(mm/min)
-
Depth of cut (mm)
0.5
Machining time (sec)
-

CASE STUDY TOP

page top