XEBEC Floating Holder™ Lineup

XEBEC Floating Holder Straight Shank

 
Product code Holder shank
diameter
Matching 
Sleeve
Floating
stroke
Spring load Maximum rotation
speed
Remarks
FH-ST12-SL10 φ10mm S40M-SD10 6mm Stroke
0mm
Approx4.5N 5000min-1 Replacement of
FH-ST12
φ8mm S40M
With the supplied bush S25M
φ6mm S15M-P Stroke
6mm
Approx6.3N
With the supplied bush
S06M
End of Manufacture
FH-ST12
φ8mm S40M 6mm Stroke Approx4.5N 5000min-1 End of Manufacture
S25M 0mm
φ6mm S15M-P Stroke Approx6.3N
With the supplied bush S06M 6mm
FH-ST20-60 φ12mm S60M 6mm Stroke Approx2N 2000min-1  
0mm
FH-ST20-100 φ16mm S100M Stroke Approx6N 1200min-1
6mm

*Production of the FH-ST12 has now terminated. The replacement item, the FH-S12-SL10, has no changes to the external dimensions and spring tension.If using S25M or S40M, please be aware that total length increases by 2mm when a bush is attached.
*FH-ST12-SL10 is delivered with φ6mm and bush. (
φ6 bush for S06M and S15M-P and φ8 for S25M and S40M.)
*Spring load is adjustable between Approx. 2-6N when the stroke is 0mm and between Approx. 6-10N when the stroke is 6mm.
*FH-ST12-SL10 is delivered with a standard spring. High- and low-tension springs are also included.

*The storage of the spring has a diameter of Φ10.5 x 25mm when relaxed and Φ10.5 x 19mm when contracted, and slides 6mm. 
Use the dedicated spring, or it may result in malfunction or breakage of the tool. 
*In addition to the high load spring (0.72kgf to 1.05kgf), we also have a maximum load spring (1.52kgf to 3.34kgf) that has an even higher load.  
*For FH-ST12-SH10, bush for φ3mm shank is available.
*If using FH-ST12-SL10 in dry processing, it is recommended to use a protective dust cover.
*If the tool length is problematic, use XEBEC Short BT Holder.


FH-ST12-SL10

FH-ST20


 

XEBEC Floating Holder BT Shank Type

Product code Target
model
Holder shank
diameter
Matching brush
diameter
Floating stroke Spring load
(Initial setting)
Length under gauge line
FH-BT30 For BT-30 φ8mm
(Optional bush required
for φ6 shank)
φ25・φ40
(Optional bush required
for φ6 and φ15 brush)
6mm Stroke 0mm
Approx.2N(0.2kgh)
Stroke 6mm
Approx.6N(0.6kgh)
75mm
FH-BT40 For BT-40 60mm

page top