XEBEC Ceramic Stone™ How to Use

Stick type

Press the tip against the surface at an angle of approximately 45 degrees.
*XEBEC Ceramic Stone Diamond contains diamond entirely, thus the side can be also used for polishing.
 
It can be used by directly holding in your hand, or can be used with the optional stick holder to improve work efficiency.
 
Use with a vibrating tool (electric, ultrasonic and pneumatic type) improves efficiency.
*If you are using an ultrasonic vibration tool, it is recommended to use the XEBEC Ceramic Stone Heat-Resistant, which is resistant up to 200℃.
*XEBEC Ceramic Stone Soft (BS-2006M) cannot be used with a vibrating tool.

The use of metal polish liquid is recommented to prevent clogging and improve polishing efficiency.
 

Rod type

For the rod type, the entire surface (tip and sides) has grinding power. To improve work efficiency, make contact the tip with the polishing surface at angle of approximately 45 degrees.

It can be used by directly holding in your hand, or can be used with the optional stick holder to improve work efficiency.
 
Use with a rotating tool (electric and pneumatic types) improves work efficiency.
*XEBEC Ceramic Stone Soft (PBS-30M) cannot be used with a vibrating tool.
 
The use of mental polish liquid is recommended to prevent clogging and improve polishing efficinecy.

Precaution in use

Before using a vibration tool or a hand grinder, carefully read the usage precautions and respective manuals.
When using the rod type (φ2.34mm, φ3mm) with a hand grinder, cut off the stone less than 50mm in length, and use at less than the maximum rotation speed of 30000min-1.
 

Use with an ultrasonic polisher.

Check the appropriate output. The tool may break or generate heat when the output is too large.
Check the appropriate length. If the length is inappropriate, the tool may not vibrate, or cause heat generation due concentrated output.
 
Clamp the tool securely. Poor clamping may concentrate output, resulting in excessive heat generation.
Carefully read the instruciton manual of an ultrasonic polisher because polishing perfomance differes depending clamping method.
 
*XEBEC Ceramic Stone Soft (BS-2006M) cannot be used with a vibrating tool.
 
 

page top