XEBEC Self-Adjusting Sleeve™

Optional Tools for XEBEC Brush Surface

XEBEC Self-Adjusting Sleeve is an optional tool for automating the brush projection of XEBEC Brush Surface.
It releases from frequent line stops and maintains optimal processing conditions.

How to Use

By mounting this tool instead of the special sleeve for XEBEC Brush Surface, it reduces the hassle of tool length management and adjustment. It is necessary to assemble a rack gear inside the machine, in order to rotate the side gear embedded in the XEBEC Self-Adjusting Sleeve. The projection length can be adjusted at predetermined length by passing the brush through the rack gear and then rotating the side gear. A projection length of 0.05mm to 1mm can be set with one rotation of the side gear. 
 

Apparatuses that can mount the tool

The tool can be mounted on apparatuses that control the rotation speed.
The tool can be used  on machining centers, robots, special machines, etc.
 

For more usage instructions please see the support page.

Lineup

XEBEC Self-adjusting sleeve

Product code Over length(mm) Outermost diameter(mm) Shank diameter(mm) Supporting brush(Product code) Maximum rotation speed
XP-AUT-06M 124.1mm φ37mm φ10mm A13-CB06M、A11-CB06M
A21-CB06M、A31-CB06M
10,000min-1
XP-AUT-15M 136.3mm φ37mm φ10mm A13-CB15M、A11-CB15M
A21-CB15M、A31-CB15M
6,000min-1
XP-AUT-25M 189mm φ60mm φ16mm A11-CB25M、A21-CB25M
A31-CB25M
5,000min-1
XP-AUT-40M 189mm φ60mm φ16mm A11-CB40M、A21-CB40M
A31-CB40M
3,000min-1
For maintenance please see the support page.

MOVIE:Specification&How to Use

PRODUCTS TOP

page top