XEBEC Brush™ Crosshole Lineup/How to Select

Lineup

 

A12 Type (red brush)

Product code Target hole diameter  Brush diameter a Shank diameter c Full length Recommended rotation speed Maximum rotation speed
CH-A12-1.5M φ3.5~5mm φ1.5mm φ3mm 120mm 9,000~11,000min 20,000min-1
CH-A12-3M φ5~8mm φ3mm φ3mm 120mm 7,000~10,000min-1 14,000min-1
CH-A12-3L φ4mm 170mm 12,000min-1
CH-A12-5M φ8~10mm φ5mm φ6mm 120mm 8,000~10,000min-1 14,000min-1
CH-A12-5L φ6mm 170mm 12,000min-1
CH-A12-7M φ10~20mm φ7mm φ6mm 120mm 7,000~10,000min-1 14,000min-1
CH-A12-7L φ8mm 170mm 12,000min-1
CH-A12-11M φ14~20mm φ11mm φ12mm 120mm 6,000~7,500min 14,000min-1
CH-A12-11L φ12mm 170mm 12,000min-1

Tool schematic

 
 

A33 Type (blue brush)

Product code Target hole diameter Brush diameter a Shank diameter c Full length Recommended rotation speed Maximum rotation speed
CH-A33-3M φ5~8mm φ3mm φ3mm 130mm 7,500~9,000min-1 14,000min-1
CH-A33-3L φ4mm 180mm 12,000min-1
CH-A33-5M φ8~10mm φ5mm φ6mm  φ130mm 7,500~8,000min-1 14,000min-1
CH-A33-5L φ6mm 180mm 12,000min-1
CH-A33-7M φ10~14mm φ7mm  φ6mm φ130mm 6,500~8,000min-1 14,000min-1
CH-A33-7L φ8mm 180mm 12,000min-1
CH-A33-11M φ14~20mm φ11mm  φ12mm φ130mm 14,000min-1
CH-A33-11L φ12mm 180mm 12,000min-1

Tool schematic

 

How to select

 
If the target depth is over 140mm, the Extra-Long is available as a custom product. See the page for XEBEC Brush Crosshole Extra-Long
 

page top