XEBEC Hand Tools How to Use/Process conditions

XEBEC Brush™ End type

*Do not use with a pneumatic tool.

How to Use

  • Use with an electronic grinding tool that can controls rotation speed.
  • High grinding power at the tips of the bristles.
Please use by contacting a flat surface with the tip of the tapered section.

Recommended rotation speed/Maximum rotation speed

Please see the table below.

Product code Ceramic fiber rod (color) Brush diameter Ceramic fiber rod length Shank diameter Recommended rotation speed Maximum rotation speed
A13-EB06M A13(Pink) φ3mm 30mm φ3mm 3,000min-1 3,000min-1
A11-EB06M A11(Red) φ5mm 20mm 7,000min-1 12,000min-1
A21-EB06M A21(White) φ5mm 20mm 7,000min-1 12,000min-1



XEBEC Brush™ Crosshole

*Do not use with a pneumatic tool.

How to use

  • Use with an electronic grinding tool that can controls rotation speed.
  • Rotate the brush inside workpiece and move to use near the burr area.
 

Recommended rotation speed/Maximum rotation speed

Please see the table below.

Product code Ceramic fiber Full length Brush diameter Ceramic fiber rod length Shank diameter Recommended rotation speed Maximum rotation speed
CH-A12-1.5M φ3.5~5mm 120mm φ1.5mm 50mm φ3mm 3,000~5,000min-1 5,000min-1
CH-A12-3M φ5~8mm φ3mm 50mm 5,000min-1
CH-A33-3M φ5~8mm 130mm φ3mm 60mm 5,000min-1



XEBEC Stone™ Flexible Shaft

*Do not use with a pneumatic tool.

How to Use

  • Use with an electronic grinding tool that can controls rotation speed.
  • Use the tool by moving it lightly (bend displacement of around 0.5mm)and placing it into contact.

Recommended rotation speed/Maximum rotation speed

Please see the table below.

Product code Head size Head shape Shank diameter Recommended rotation speed Maximum rotation speed
Blue#800 Orange#400 Gray#220
CH-PB-3B CH-P0-3B CH-P0-3B φ3mm Ball type φ3mm 5,000~8,000min-1 15,000min-1
CH-PB-3R CH-P0-3R CH-P0-3R φ3×3mm Cylinder type 15,000min-1
CH-PB-4B CH-P0-4B CH-P0-4B φ4mm Ball type 13,000min-1
CH-PB-4R CH-P0-4R CH-P0-4R φ4×4mm Cylinder type 13,000min-1
CH-PB-5B CH-P0-5B CH-P0-5B φ5mm Ball type 12,000min-1
CH-PB-5R CH-P0-5R CH-P0-5R φ5×5mm Cylinder type 12,000min-1
- - CH-PM-5R-C01 φ5x10mm Cylinder type 12,000min-1
CH-PB-6B CH-P0-6B CH-P0-6B φ6mm Ball type 10,000min-1
- - CH-PM-10B φ10mm Ball type 4,000~5,000min-1 6,000min-1



XEBEC Stone™ Mounted Point

How to use

  • It can be used with a pneumatic tool because it can be used with high rotation speed.
  • Use by contacting the tapered tip to the surface /bearing surface of a workpiece.

Recommended rotation speed/Maximum rotation speed

Please see the table below.
Product code Head diameter Head length Equivalent grit Shank size Recommended rotation speed Maximum rotation speed
AX-PM-5RF φ5mm 8mm #220 φ3mm 15,000min-1 30,000min-1
AX-PM-3R φ3mm 20mm #220 φ3mm 60,000min-1
AX-PM-6T φ6mm 20mm #220 φ3mm 60,000min-1



XEBEC Ceramic Stone™ Meister Finish Rod type

How to Use

  • It is possible to polish and deburr using both the tip and sides of the tool.
  • * The ceramic fibers are arranged in a braided pattern, enabling polishing using the sides.
  • Form the ceramic stone tip to fit the narrow and thin place.

Recommended rotation speed/Maximum rotation speed

  • Using it together with an oscillation tool (ultrasonic, air, electric etc.) improves effectiveness.
  • * Maximum number of rotations: 30,000 min-1 or less; use with pieces of a total length of 50mm or less. Please refer to "stick" for information on using ultrasonic tools.
 

Dimensions Red White Blue Black Orange Lihght Brown Gray Recommended rotation speed Maximum rotation speed
diameter X length (mm) #1200 #1000 #800 #600
#400 #300 #220
φ3×50 PR-30S PW-30S PB-30S PP-30S PO-30S PL-30S PM-30S 7,000min-1 30,000min-1



XEBEC Ceramic Stone™ Meister Finish Stick type

How to Use

  • Form the ceramic stone tip to fit the narrow and thin place. Use the tip at an angle to the surface of a workpiece.
  • Keeping the tool at an angle of 5 to 45 degree to the workpiece produces the best results.
  • Form the ceramic stone tip to fit the narrow and thin place.
 

XEBEC Ceramic Stone™ Soft

How to Use

  • Adapt to the shape of the workpiece.
  • Please note it cannot be twisted. Due to the binder being soft, the grindstone may split when twisted strongly.

XEBEC Ceramic Stone™ Pencil

How to Use

  • High grinding power at the tips of the grindstone. Use the tip for deburring and polishing.
  • Form the tip into sharp and thin in accordance with workpiece

Mobile Micromotor System

  1. Attach the handpiece to the controller.
  2. Rotate only the switching ring of the chuck on the handpiece clockwise until you hear it click. The chuck will open.
  3. Attach the tool with Φ3mm shank to the chuck.
  4. Rotate only the switching ring of the chuck on the handpiece counter-clockwise until you hear it click and lock the tool in place.
  5. Turn the power of the controller on and use the tool while keeping below the maximum rotation speed.

page top