Tool Guide

XEBEC Technology offers deburring and polishing tools for CNC machining and hand work.

CNC deburring and polishing

Slect a tool depending on the purpose and machining area (shape of the workpiece).
 
Product Name    Purpose Target workpiece Application
XEBEC Brush™ Surface 
Deburring
Polishing 
      
       
Flat surface
Curved surface
After face milling, end milling and drilling
XEBEC Brush™ Wheel Type
Deburring
Polishing 
                                  
         
Side surface
Inner diameter over φ50mm
After end milling
XEBEC Brush™ Crosshole
Deburring
Polishing 
    Crosshole
Inner diameter
Deburring after drilling 
XEBEC Back Burr Cutter and Path™ 

Deburring
    Back deburring as well as front edge deburring
Off-center hole
Deburring after drilling 
XEBEC Stone™ Flexible Shaft 

Deburring
   Hole edge deburring
Deburring after drilling 

Contact us for assistance.

Manual deburring and polishing

Slect a tool depending on the usage and application.
Product name  Usage Application Features
XEBEC BrushEnd type 
Electric tool



(3mm shank)
Polishing curved surface  
Toolmark removal
Removing oxcide layer 
Ideal for flat and curved surface by preventing undulation .
Suitable for both deburring and polishing.
XEBEC Brush™ Crosshole
Edge deburring
Deep counterbored part
Inner wall polishing
Ideal for horizontal holes or deep parts.
Both deburring and polishing without scratching an inner wall.
XEBEC Stone™ Flexible Shaft
Edge deburring
Rounded surface polishing
Blind hole 
Flexible shaft allows soft contact with workpiece.
Ideal for deburring and polishing.
XEBEC Stone™ Mounted Point
Electric tool



(3mm shank)

or

Pneumatic tool



(3mm shank)
Edge deburring
Remove partition line
 (alminum diecast)
Can be used at high rotation speed.
Ideal for deburring and polishing.
XEBEC Ceramic Stone™ Meister Finish
 RodType*
Mold polishing
Edge deburring 
High grinding power on the entire surface.
Easy to form the tip.
XEBEC Ceramic Stone™ Meister Finish
Stick Type*
Directly held in hand

or
 
The optional stick holder 
Mold polishing
Edge deburring
Removing sratches  
Hard to break, easy to form the tip.
XEBEC Ceramic Stone™ Soft 
・Ideal for aluminum parts.
・Removing scratches and fine burrs.
XEBEC Ceramic Stone™ Pencil
XEBEC Pencil holder  Fine deburring
Deburring narrow parts
Deburring slit part 
Ideal for small and narrow parts.
Suitable for both deburring and polishing.
Mobile Micromotor System
Usable for XEBEC's hand tools with Φ3mm shank.
The maximum rotation speed is 30,000min-1.
Product code: M2P33STX
*XEBEC Ceramic Stone Heat Resistant and XEBEC Ceramic Stone Diamond are included.
Contact us for assistance.

page top