Successful Applications

Deburring (Cylinder's Inner Surfaces)XEBEC Stone™ Flexible Shaft

Workpiece Information

XEBEC Stone Flexible Shaft
Industry General Machinery/Others
Part Name Hydraulic Valve
Material Steel (SCM)
Pre-processing Drilling

Processing Conditions

Not Available
Tool Used XEBEC Stone™ Flexible Shaft (CH-PM-5B)
Description Deburring parts of (Φ100*Φ5) cross-hole
Recommended Use Conditions
Tool Revolutions 5000min~8000min-1
Instrument Leutor
Processing Time -
How to use Allow the tool to contact, bending the shaft lightly (about 1mm displacement of bending).

Installation Effect

Before Installation

Tool Rubber grinding wheel, carbide rotary bur
Problems By removing the burrs, the edge shape became broken, and also caused secondary burrs to occur.

After Installation

Tool XEBEC Stone™ Flexible Shaft (CH-PM-5B)
Effect Due to high grinding power, the spring's steel shaft bent. It was then possible to remove only the burrs and keep the shape of the edge.
Because the shaft part is long and narrow, fatigue caused from the cross-hole deburring of deep areas was reduced.