Successful Applications

Deburring (Flat Surfaces)XEBEC Brush™ Surface

Workpiece Information

XEBEC Brush Surface
Industry Automotive/Transport Equipment
Part Name Cam Cap
Material Aluminum Alloy
Pre-processing ①Milling ②Drilling

Processing Conditions

Tool Used ①XEBEC Brush™ Surface (A11-CB40M)
②XEBEC Brush™ Crosshole (CH-A12-5M)
Description ①After milling, deburr the matching surface
②After drilling, deburr cross-holes
Recommended Use Conditions
Tool Revolutions ①1500min-1 ②10000min-1
Depth of Cut ①0.5mm
Feed Rate ①-
Processing Time ①2000mm/min ②300mm/min

Installation Effect

Before Installation

Tool Abrasives-impregnated nylon brush
Problems Process using nylon brushes left excessive burrs; insufficient process yield required additional processing by hand

After Installation

Tool ①XEBEC Brush™ Surface A11-CB40M
②XEBEC Brush™ Crosshole CH-A12-5M
Effect No more burrs left; stable and efficient, full automation with machining centers was possible