Successful Applications

Deburring (Flat Surfaces)XEBEC Brush™ Surface

Workpiece Information

XEBEC Brush™ Surface
Industry Automotive/Transport Equipment
Part Name Rocker Arm
Material SCr420
Pre-Processing Cutting

Processing Conditions

Tool Used XEBEC Brush™ Surface (A11-CB40M)
Description Automated deburring on special machine after milling process.
Recommended Use Conditions
Tool Revolutions 3000min-1
Depth of Cut 1.0kgf
Feed Rate -
Processing Time 4.8 seconds/piece

Installation Effect

Before Installation

Before Installation
Tool Abrasives-impregnated nylon brush
Problems Process using abrasives-impregnated nylon brush left excessive burrs; insufficient process yield required additional processing by hand.

After Installation

After Installation
Tool XEBEC Brush™ Surface (A11-CB40M)
Effect No more burrs left; full automation of the process was possible.