Successful Applications

Deburring (Flat Surfaces)XEBEC Brushâ„¢ Surface

Workpiece Information

XEBEC Brush Surface
Industry Automotive/Transport Equipment
Part Name Ring Plate
Material SPH
Pre-Processing Punch Pressed

Processing Conditions

Tool Used XEBEC Brushâ„¢ Surface (A21-CB40M)
Description External circumference: removing burrs caused by the press. Deburring through rotating workpiece and tool to right + rotating workpiece and tool to left.
Recommended Use Conditions
Tool Revolutions 3000min-1
Depth of Cut 1.0kgf
Feed Rate -
Processing Time 12 seconds/piece

Installation Effect

Before Installation

Tool Abrasives-impregnated nylon brush
Problems Abrasives-impregnated nylon brushes did not have enough grinding power, and grindstones did not have a good fit. Excessive burrs remained, and automation was impossible.

After Installation

Tool XEBEC Brushâ„¢ Surface (A21-CB40M)
Effect No more burrs left; full automation of the process was possible.