Successful Applications

Polishing (Flat Surfaces)XEBEC Brushâ„¢ Surface

Workpiece Information

XEBEC Brush Surface
Industry General Machinery/Others
Part Name Jig Plate
Material Aluminum
Pre-processing Drilling

Processing Conditions

Not Available
Tool Used XEBEC Brushâ„¢ Surface (A11-CB15M)
Description Burrs from 7370 holes (1.2mm diameter)
Recommended Use Conditions
Tool Revolutions 4800min-1
Depth of Cut 0.5mm
Feed Rate 2400mm/min
Processing Time -

Installation Effect

Before Installation

Tool -
Problems Manual chamfering takes 12 hours.

After Installation

Tool XEBEC Brushâ„¢ Surface (A11-CB15M)
Effect With the automation by MC, time was reduced to 15 minutes (1/48).