Product: XEBEC Stone™ Mounted Point

XEBEC Stone Mounted Point 製品イメージ

* Please be careful of similar products.

For Air Tools Change the shape of the grindstone accordingly with the purpose of use!

ダイヤモンド電着ヤスリ イメージ

* Please use the electrodeposited diamond file for molding

No cracking! No chipping! No clogging!
Can be used with high speed rotating tools (pneumatic tools).

Features

・Cutting edges are continually exposed over the entire surface thanks to self-sharpening action.
・Works great for any material up to 57HRC such as aluminum and stainless steel.
・Efficient removal of burrs with base thickness up to 0.2mm.

Usage/Applications

Deburring of stainless
steel plate grooves

用途・事例 イメージ

Light chamfering of
aluminum workpieces

用途・事例 イメージ

Since it is a block of ceramic grindstone, there is no spoke nipple, and the entire head can be used until the end.

Finishing of iron edges

用途・事例 イメージ

Suitable for processing of shaft components with Φ1.5 and fine details

* Can grind even at low revolutions.

How to use

  • When attaching it to a rotary tool, please insert the axis to the rotary tool and tighten it firmly.
使用方法 イメージ

* Please use the overhang at 0mm.

Usage Guidelines

  • All products are also available at low revolutions (power tools). Please move the tool and use the entire grindstone.
  • Do not use at an unreasonable angle, or with excessive pressure.
  • Do not use in places where there is risk of fire or explosion.
  • Please do not scrape or modify the axis in any way.
  • When using the rotary tools, please read the instructions and warnings of use when attaching tools, and be sure to use the tools under the maximum number of revolutions.

Lineup

Product Code Head Diameter Head Length Equivalent Grit Shank Diameter Maximum RPM
AX-PM-5RF Φ5mm 8mm #220 Φ3x20mm 30,000min-1
AX-PM-3R Φ3mm 20mm #220 Φ3x20mm 60,000min-1
AX-PM-6T Φ6mm 20mm #220 Φ3x20mm 60,000min-1

Product Specifications

AX-PM-5RF
AX-PM-5RF製品仕様 イメージ Please use under 30,000min-1
  • Use the steel spring on the shaft to soften contact with the workpiece.
  • Suitable for processing of shaft components with Φ1.5 and fine details.
  • There is grinding power in the entire head.
AX-PM-3R
AX-PM-3R製品仕様 イメージ Please use under 60,000min-1
  • Since it is a block of ceramic grindstone, there is no spoke nipple, and the entire head can be used until the end.
  • There is grinding power in the entire head.
AX-PM-6T
AX-PM-6T製品仕様 イメージ Please use under 60,000min-1
  • Since it is a block of ceramic grindstone, there is no spoke nipple, and the entire head can be used until the end.
  • There is grinding power in the entire head.