Effects after installation

BEFORE

AFTER

Tool
Effect
Surface roughness improved from Ra 15μm, Rz 48μm to Ra 0.12μm, Rz 0.98μm

Workpiece information

Industry
General Machinery/Others
Part name
SUS Mold
Material type
SUS304
Cutting process
Ball End mill processing

Processing conditions

Tool
Processing detail
Removal of cutter marks and polishing after ball-end milling process

Tool used:A31-CB25M、Rotation speed:5,000min-1、Feed:1,500mm/min、Depth of cut:0.3mm
and
Tool used:A11-CB25M、Rotation speed:5,000min-1、Feed:6,000mm/min、Depth of cut:0.3mm
Rotation speed(min-1)
5,000
Feed, feed rate(mm/min)
1,500
Depth of cut (mm)
0.3
Machining time (sec)
-

CASE STUDY TOP

page top