Effects after installation

BEFORE

Tool
File
Problem
Burrs on inside and outside edges of the pipe were manually removed by filing. Time-consuming and inefficient work. Finish quality was not consistent.

AFTER

Tool
Effect
Fix and lump 12 pipes together using a jig and deburr all at once. Achieved efficient automatic deburring in a shorter time. Edge shapes became uniform and finish quality was improved.

Workpiece information

Industry
General Machinery/Others
Part name
Pipe (Aluminum)
Material type
Aluminum
Cutting process
Cutting processing

Processing conditions

Tool
Processing detail
Deburring at edge face after cutting process
Rotation speed (min-1)
4,000
Feed, feed rate (mm/min)
3,000
Depth of cut (mm)
1.0
Machining time (sec)
-

CASE STUDY TOP

page top