XEBEC Titular Flotante™

Optional Tools for XEBEC Brush Surface

XEBEC Floating Holder is an optional tool for XEBEC Brush Surface to stabilize the cutting load.

Extension of brush tool life (Up to 4 times longer)

Since the processing state is more stable, it reduces the amount of tool wear

Reduce process adjustments

Extend the interval of adjustment for brush projection and depth of cut due to tool wear

Consistent quality finish

Reduce change in depth of cut due to tool wear for consistent edge quality.

How to Use

The tool can be used by mounting the XEBEC Brush Surface on the XEBEC Floating Holder and tightening the fixing screws on the shank.

Target

The tool can basically be used for workpieces that can be processed with XEBEC Brush Surface. However, it cannot be used for intermittent processing in which the brush would fall or when there is a protruding part.

Apparatuses that can mount the tool

The tool can be mounted on apparatuses that control the rotation speed.
The tool can be used on machining centers, combined lathes, robots, special machines and drilling machines.
 Available in straight shank type and BT shank type.
 

For more usage instructions please see the support page.

Lineup

XEBEC Floating Holder Straight Shank

Product code Holder shank
diameter
Matching
Sleeve
Floating
stroke
Spring load Maximum
rotation
speed
Remarks
FH-ST12-SL10 φ10mm S40M-SD10 6mm Stoke
0mm
Approx4.5N 5000min-1 Replacement of
FH-ST12
φ8mm S40M

With the supplied bush
S25M
φ6mm S15M-P Stoke
6mm
Approx6.3N

With the supplied bush
S06M
End of Manufacture
FH-ST12
φ8mm S40M 6mm Stoke Approx4.5N 5000min-1 End of Manufacture
S25M 0mm
φ6mm S15M-P Stoke Approx6.3N
 

With the supplied bush
S06M 6mm
FH-ST20-60 φ12mm S60M 6mm Stoke Approx2N 2000min-1  
0mm
FH-ST20-100 φ16mm S100M Stoke Approx6N 1200min-1
6mm

*La pieza FH-ST12 ha dejado de fabricarse. La pieza que la sustituye, FH-S12-SL10, conserva las mismas dimensiones externas y tensión del muelle. Si emplea las piezas S25M o S40M, tenga en cuenta que la longitud total aumentará en 2 mm al acoplar el cepillo.
*FH-ST12-SL10 se entrega con φ6mm y adaptador (adaptador de φ6 para S06M y S15M-P, y de φ8 para S25M y S40M).
*La carga del muelle puede ajustarse entre 2 y 6 N si el recorrido es de 0 mm y entre aprox. 6 y 10 N si el recorrido es de 6 mm.
*FH-ST12-SL10 se entrega con un muelle estándar. También se incluyen muelles de alta y baja tensión.
*La cámara del muelle tiene un diámetro de Φ10,5 x 25 mm en reposo y de Φ10,5 x 19 mm al contraerse, y recorre 6 mm. Use el muelle correspondiente, ya que de lo contrario la herramienta podría funcionar inadecuadamente o dañarse. 
*Además del muelle de carga elevada (0,72 kgf a 1,05 kgf), también ofrecemos un muelle de carga máxima con una carga superior (1,52 kgf a 3,34 kgf).   

*Hay un adaptador disponible para vástagos de φ3mm, para el modelo FH-ST12-SH10.
*Se recomienda usar un protector antipolvo en caso de emplear el FH-ST12-SL10 para mecanizar en seco. 
*Si la longitud de la herramienta resulta problemática, emplee el mandrino corto BT XEBEC.

XEBEC Floating Holter BT Shank Type

Product code Target
model
Holder shank diameter Matching brush diameter Floating stroke Spring load (Initial setting) Length under gauge line
FH-BT30 For BT-30 φ8mm
(Optional busk required for φ6 shank)
φ25・φ40
(Optional bush required forφ6 and φ15 brush)
6mm Stroke 0mm
Approx.2N(0.2kgh)
Stroke6mm
Approx.6N(0.6kgf)
75mm
FH-BT40 For BT-40 60mm
 For additional information, please see the support page.

PRODUCTS TOP

page top